Maytrix Power Guide

Simple power. Clean installation.

Every Maytrix infinity mirror includes power equipment selected for the finished piece. The included power equipment uses a U.S.-standard plug for connection to a standard U.S. wall outlet.

No special outlet is normally required. Pieces over 6 feet in diameter require two power supplies. The final power-supply configuration is confirmed with your order.
Maytrix power supply, LED controller, vented aluminum electronics box, and related components

The power supply, LED controller, and related electronics are housed in the fully vented aluminum box shown.

Enclosure dimensions: 9 in W × 6 in H × 3.5 in D

Standard wall outlet

The included U.S.-standard plug connects to a standard U.S. wall outlet.

Power supply included

Your piece includes power-supply equipment selected for its finished configuration.

Integrated LED lighting

The lighting is powered through the supplied equipment selected for the finished piece.

Two supplies over 6 ft

Pieces over 6 feet in diameter require two power supplies.

How it works

From the mirror to the wall.

The power connection is designed to be straightforward and planned around your finished piece.

Connect the mirrorConnect the mirror's lighting lead to the supplied power equipment according to the instructions included with your order.
Position the power supplyPlace each power supply where it remains dry, ventilated, accessible for service, and free from pressure or pinched cables.
Plug into the outletConnect the U.S.-standard plug to a standard U.S. wall outlet, then test the lighting before completing the final installation.
Planning your outlet

What your space needs.

Plan the outlet location and cable path from the default rear-center exit before mounting so the connection stays clean, accessible, and clear of the mounting hardware.

LED systemIntegrated LED lighting is powered through the supplied equipment.
Power supplyPower-supply equipment is included and selected for your finished piece.
Outlet and plugA U.S.-standard plug connects to a standard U.S. wall outlet. Contact Maytrix before production for installations outside the United States.
Number of suppliesPieces over 6 feet in diameter require two power supplies. The final power-supply configuration is confirmed with your order.
Power/wiring exitThe default exit is rear center. If your installation needs another location, request it before production.
Standard cable lengthApproximately 6 feet total. Measure from the planned mirror connection to the outlet while allowing a relaxed cable route without stretching or sharp bends.
Longer cable requestsLonger cable lengths can be arranged on request. Contact us before production so the correct solution can be included with your piece.
Final specificationsThe final power-supply configuration, connections, and placement needs are confirmed for your finished mirror.
Hiding power

Ways to create a cleaner finish.

The best method depends on your outlet location, wall construction, mirror placement, and local electrical requirements.

Outlet behind or near the mirror

With the default rear-center power exit, a properly positioned outlet can keep most of the cable out of view. Confirm that the plug and power supply fit without preventing the mirror from sitting correctly or interfering with the Z-bracket.

  • Keep all Z-bracket contact areas clear
  • Allow room for the plug and cable bend
  • Keep the power supply ventilated and accessible

Paintable surface raceway

A slim cord cover or surface raceway can route the cable neatly to a nearby outlet without opening the wall. It can often be painted to blend with the wall.

  • Simple option for finished spaces
  • Keeps the cable protected and organized
  • Leaves the connection accessible

Recessed or in-wall solution

For the cleanest appearance, a qualified electrician can plan a code-compliant recessed outlet or permanent wiring solution before the mirror is installed.

  • Best planned before mounting begins
  • Outlet location must avoid the mounting rail
  • Power equipment must remain safely serviceable

Architectural concealment

Cables may also be routed behind furniture, millwork, a display wall, or another planned feature, provided the route does not pinch the cable or block ventilation and access.

  • Useful for retail and event installations
  • Plan access for future maintenance
  • Secure loose cable away from traffic
Important: Do not place a standard plug connection, extension connection, or power supply loose inside a sealed wall cavity. Never pinch, cut, splice, cover, or modify the supplied power equipment. Any outlet relocation or mains-voltage work should be completed by a qualified electrician in accordance with local code.

Power questions

Does my mirror plug into a standard wall outlet?

Yes. The included U.S.-standard plug connects to a standard U.S. wall outlet. Any project-specific requirements will be identified with your order.

Is the power supply included?

Yes. Each piece includes power-supply equipment selected for its finished configuration. Pieces over 6 feet in diameter require two power supplies.

How is the lighting powered?

The integrated LED lighting connects through the supplied power equipment selected for the finished piece.

Why does a piece over 6 feet need two power supplies?

Pieces over 6 feet in diameter require two power supplies so the lighting system can be configured for the full piece. The final power-supply configuration is confirmed with your order.

Where does the power/wiring exit?

The default exit is at the rear center of the piece. Alternate exit locations are available when requested before production.

What if my installation is outside the United States?

The standard supplied plug is U.S.-standard. Contact Maytrix before production so plug and input-power compatibility can be confirmed for your location.

How long is the power cable?

The standard connection provides approximately 6 feet of total cable length. If your outlet is farther away, request a longer cable before production so we can plan the correct solution.

Can I use an extension cord?

For temporary testing, use only a properly rated, undamaged cord that meets the power equipment's requirements. For a permanent display, a correctly located outlet or another code-compliant solution planned by a qualified electrician is cleaner and safer.

Can the power supply be hidden behind the mirror?

Only when there is enough clearance, ventilation, and service access and it does not interfere with the Z-bracket or prevent the mirror from sitting correctly. Do not force the power supply into a tight space or leave it loose inside a sealed wall.

Can the cable run inside the wall?

Do not place a standard power cord, plug connection, or power supply inside the wall. Ask a qualified electrician to design a code-compliant in-wall or recessed-outlet solution for your space.

Should I test power before mounting?

Yes. Connect and test the mirror before the final lift whenever possible. Confirm that every powered section lights correctly and that all cable paths and power supplies remain accessible.

What should I send Maytrix when planning power?

Send your order or quote details, a photo or drawing of the wall, the planned mirror location, the outlet location, and the approximate distance from the mirror connection to the outlet.

Need a longer cable or help planning power?

Send us your mirror size, outlet location, and a photo or drawing of the installation area. We can confirm the power-supply setup, review the default rear-center exit, and coordinate an alternate exit location before production if needed.

Get Power Help